24CH PoE Ethernet Switch IEEE802.3af for IP Camera

Unifore offers you high quality PoE (Power over Ethernet) switch which allows you to setup cost-effective IP surveillance system with minimum budget. POE2401P is a 24CH 10/100/1000 Mpbs 26 ports, 24 channel PoE manageable switch, it's IEEE802.3af and IEEE802.3 legacy standard compliant PoE switch. It has 24x RJ45 10/100 Mbps PoE ports, and 2x RJ45 10/100/1000 Mbps ports and 2x SFP 1000 Mbps ports (Fiber, Combo mode). This Power over Ethernet network switch can provide data and power to network devices such as IP cameras, Wi-Fi wireless access point, VoIP telephone system, PoE printers and more.

POE2401P can automatically detect PD devices which are compliant with IEEE802.3af, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Flow Control standard. The IEEE802.3af standard can provide PoE devices with voltage up to 48V DC and consumed power within 15.4W. The 802.3at version allows for powering devices with DC voltage within 50...57 V range, which consume up to 25.5 W. This group of devices includes printers, IP PTZ cameras, switches.

POE2401P adopts rack-mountable housing, can be easily mounted on network rack. It supports for (PD) PoE devices compliant with IEEE802.3af standard, auto-learning and auto-aging of MAC addresses, supports bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex mode.The included 2x SFP (Small Form-Factor Pluggable) ports can allow network switch connect to fiber optic cable for high speed data transmission (1 Gigabit bps).

The latest PoE standard includes IEEE802.3af and IEEE802.3at. IEEE802.3 can provide output power to 15.4 Watts, while IEEE802.3at (also called PoE plus, PoE+) can provide 30 Watts and 60 Watts power to PD devices. Only IEEE802.3at can work with long range IR outdoor IP camera and PTZ IP camera.

Key Features for POE2401P

• Standard PoE Ethernet Switch
• Support IEEE802.3, 802.3u, 802.3ab, 802.3x CSMA/CD, TCP/IP
• 24x RJ45 10/100 Mbps PoE ports, 2x RJ45 1000 Mbps ports
• 2x SFP 1000 Mbps ports to connect fiber optic
• Support 10 Mbps with UTP cat. 3, 4 or 5 (up to 100 m)
• Support 100 Mbps with UTP cat. 5 or 5e (up to 100 m)
• Included LED indicators for Power, Link/Act, 100M, PoE Status
• No need for installation or configuration
• IEEE802.3af maximum 15.4W for each of PoE ports
• Support for auto-learning and auto-aging of MAC addresses
• CE, FCC part 15, VCCI Class B, EN55022, Ctick, EN55024 compliant

24CH PoE Switch Gallery

Technical Specification