Have any questions?

GSM wireless alarm system touch keypad design self-monitoring sends SMS

Unifore Security

September 13,2017-4:26 AM

G60-Ultimate - wireless alarm system for DIY alarm installation. The alarm system adopts touch keypad and LCD display design, it works with maximum 112 wireless security sensors, the alarm panel has built-in GSM cellular communicator. Once an alarm occurs, the system will dial phone call and send text message to five personal phone numbers. Additionally, it's compatible with Contact ID (CID) standard, can also be linked into local alarm monitoring center.

G60-Ultimate has built-in microphone and speaker, it not only supports 2-way voice intercom, but also allows user to make hand-free phone call. It includes built-in rechargeable battery, your home alarm system will protect your family although electricity is outage.

Product Highlights

Smart touch keypad with message LCD display
Working with SIM card and telephone line, automatically switch
Calender, five personal emergency phone numbers
One central monitoring station phone number
Alarm notification via phone call or SMS.
Extra SMS phone number for system's status.
Alarm memo, entry delay, exit delay
Hybrid alarm, 30 wireless zones, 4 wired zones.
Advanced zone attribute, user-friendly zone names.
Temperature display and signal output
Relay output can be controlled by SMS or APP.
Automatically Arm/Stay Arm/Disarm
Support user code and installer code
100 alarm log
Reset factory design
Built-in speaker and Microphone
Remote two-way intercom
Built-in siren
SMS alert, when system: Arm/Disarmed, sensor's low battery, AC power failure, phone line disconnect.
Alarm communication via ADEMCO Contact ID protocol.
Backup rechargeable battery, last more than 8 hours
Work with CCTV system, IP camera