Have any questions?

Whatsapp Skype Email

Battery 1080p security camera

Battery wireless1080p security camera w PIR motion sensor S3 S4

Battery security camera that is better suitable for house and office. The product adopts aesthetic and sleek design they are beautify and less intrusive, can be blended into the decoration in your house or office. The product works with its internal high capacity battery (S3 has a 6800mAH and S4 has a 13600mAH Lithium-ion polymer battery), built-in Broadcom Wi-Fi module to provide completely wire-free installation. Thanks for the Ingenic T20 SoC featuring low power consumption technology, S3 battery can last 180 days and S4 can last 360 days.

The product includes a metal swivel bracket for ceiling and wall mountable installation. The camera supports magnetic adhesive mechanism allows users to easily take it off from the bracket. The camera has a microUSB port as the external power input, simply using a USB cable connects it to your existing cellphone charger (DC5V 2A) or USB ports of your computer, you’re able to recharge the cam feasibly. Anyhow, if you are not satified with the standby time of battery, the camera can always connect to a power adapter by using USB power cord.

Intending to provide accurate motion detection, it has a PIR motion sensor built-in that offers nearly 110 degree up to 12 meters intrusion detection scope. By combing 3-selectable (Low, Middle, High) sensitivity adjustable function, the camera can reduce false alarms and only send you push notification when motion detection is tripped. This product supports AP mode that enables users to directly access video feed through smartphone. This feature enables camera to work in places where there is no Internet/Wi-Fi available. It also helps to prevent hacking completely. For example, you’re can use smartphone as the monitor to watch the video when the camera is installed in your children’s room though the camera isn’t connected to your Wi-Fi router.

Battery camera supports AP mode
Battery camera supports AP mode

It’s a 1080p camera and has a Infrared lighting LEDs to provide night vision. Including microphone and speaker to support audio monitoring and recording and 2-way audio intercom. It uses a 3.6mm lens to provide wide field of view, hence covering the entire room without leaving blind spots. In addition to remote view, it has a microSD/SDHC (TF) memory card slot to support on-board video storage. By implementing motion detection activated recording mode, a 8Gb memory card can record up to 30 days.

Battery wireless security camera
Battery wireless security camera S3

Product specification

  • Operation System: Linux
  • Processor: Ingenic T20 (1GHz, 512MB DDR)
  • CMOS sensor: 1/3” smartsens 2-megapixel
  • Minimum illumination: Color 0.6Lux@F1.2, B/W 0.08Lux@F1.2, 0Lux (IR ON)
  • Lens: 3.6mm megapixel HD lens
  • Video compression: H.264
  • Stream: main 1920x1080, sub 640x480
  • Frame rate: 1080p@25fps
  • Audio codec: G.726, G.711, AAC, MP3
  • Auio input/output: microphone and spearker
  • Wireless network: 802.11 b/g/n 2.4G (Broadcom BCM series)
  • PIR motion detection: 110 degree wide, up to 12 meters
  • Motion detection sensitivity: Low/Middle/High
  • Night vision: 6pcs Infrared LEDs (wavelength 850nm), effective distance 5-10 meters
  • Battery: 6800mAH (S3), 13600mAH (S4)
  • Ingress protection: IP55 weatherproof and dustproof
  • Power rate: 0.75Watt (working), 0.0025Watt (standby)
  • Application: Indoor
  • Installation: ceiling/wall mountable with magnetic bracket

Contact us

Send Message or Email
Since 2009, we're your trustworthy and reliable business partner.