Have any questions?

Whatsapp Skype Email

Wireless PTZ Camera Board with 4G module

Solar powered 4G PTZ camera solution 3-megapixel WCDMA+LTE

Wireless security cameras have a big market, they are prevailing in civilian video surveillance market, there are mainly include two categories, the wireless camera uses Wi-Fi, the wireless cameras use 4G/LTE/WCDMA cellular communication. Unifore is delight to present you the latest camera board for 4G PTZ camera products. In addition to being powered by rechargeable battery, the camera board can be powered by solar panels. By adopting our latest camera board, manufacturers can quickly launch products in market, we offer free SDK for software development.

4G LTE Camera Board for Wireless PTZ Cameras
4G LTE Camera Board for Wireless PTZ Cameras
Solar Powered Wireless PTZ Cameras
4G LTE Camera Board for Solar Powered Wireless PTZ Cameras

 Product highlight

  • Support 4G cellular communication (WCDMA+LTE)
  • H.265+ video compression standard, reduce 50% network bandwidth and storage
  • Smart night vision, dual-light, Infra-red, full-color
  • Support eco mode, can be integrated with solar panel to increase battery time 40~60%
  • Active intrusion detection, deter intruders with sounds and lights
  • Support 2-way audio intercom
  • PTZ control, pan and tilt rotation to cover large area, preset position, humanoid tracking
  • Support microSD/SDHC memory card and cloud storage
  • Support remote view through App, PC software

Product Specification

  • Model: E11
  • Main processor (SoC): MSC335
  • Image sensor: 1/2.9” progressive scan CMOS, 3-megapixel
  • Video compression: H.265+/H.265/H.264
  • Bit-rate:0.1Mbps ~ 1.5Mbps adjustable
  • Video output: main stream 2304x1296; 1920x1080; 1280x720
  • Video output: sub-stream 640x360
  • Audio I/O: 1CH microphone input, 1CH audio output (with amplifier 8Ohm 2W)
  • Audio processing: G.711 codec, 2-way audio intercom, video audio sync
  • Network interface: 1x RJ45, 10/100Mps
  • TF memory card: 1x TF, max. 512G
  • Cellular communication: 4G LTE, eSIM built-in, WCDMA + LTE
  • Reset: 1x reset button
  • Light board interface: integrated with driver module (dual light board is recommended)
  • Reliability: power input and network interface meet anti-surge standard IEC61000-4-5
  • Function: OSD, humanoid detection, dual-light alarm, audible alarm
  • Protocol: TCP/IP, IPv4, DHCP, RTSP, P2P
  • App for remote view: iOS and Android, AC18Pro
  • Power input: DC12V
  • Operating temperature: -20 Celsius degree ~ 65 Celsius degree

Contact us

Send Message or Email
Since 2009, we're your trustworthy and reliable business partner.