SADP stands for search active device protocol, it's Hikvision's free and simple utility for searching Hikvision products (including IP cameras and DVRs/NVRs) in the local network. Hikvision SADP software supports Windows OS only, is available for Microsoft Windows 8.1, Windows 8, Windows 7, Windows 2008 - 32/64-bit, Windows XP, Windows 2003 - 32-bit. In addition to searching Hikvision devices, this online device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords (when the user lost/forgot a password). It can eliminate problems with duplicated IP addresses (often occurring after connecting a number of new devices), even in the same network class.
The SADP software packed in WinZIP archive is available in Hikvision website (http://oversea-download.hikvision.com/uploadfile/soft/tools/SADPTool_v3.0.0.2build20150911.exe). After downloading it onto your computer, the file should be unzipped, then starts to install.Before running the application, it is necessary to install WinPcap first. This is a set of libraries for Windows allowing for access to packets in the network stack, bypassing the upper network layers.
You can download the WinPcap here:
{josociallocker} https://www.winpcap.org/install/bin/WinPcap_4_1_3.exe {/josociallocker}
WinPcap is the industry-standard tool for link-layer network access in Windows environments: it allows applications to capture and transmit network packets bypassing the protocol stack, and has additional useful features, including kernel-level packet filtering, a network statistics engine and support for remote packet capture.
After launching the program, SADP automatically scans the local network in search of newly connected devices, which are then displayed in the main window. The list of newly connected devices is refreshed every 15 s, and the list of disconnected devices is refreshed every 45 s. The user can also manually refresh the list of connected devices by using the [Refresh] button. The main window displays basic information about network parameters of the devices such as: device type, IP address, communication ports, gateway, mask, MAC address, etc. Additional information includes device firmware version, name and serial number, activation status. By pressing [Save as excel], all the information can be backed up as an .xls file. The program enables the user to easily move on to the device login window, just by double-clicking on the device, which automatically redirects to the window via a web browser.
Hikvision NVRs with firmware version above V3.3.0 and cameras with firmware version above V5.3.0 connected to the network for the first time are detected by the SADP app as "Inactive". It is associated with additional protection introduced by Hikvision to hinder access by unauthorized people. To activate a device, the user must set a new password for the "admin" account. This can be done via a web browser at the first logon, via the SADP app, or directly from the NVR. To activate a device using SADP, the user should:
The program automatically checks and displays the strength of the entered password. A strong password must be composed of 8 to 16 characters, among which there should be at least three of the following types: digits, lowercase letters, uppercase letters, special characters.
To modify network parameters of a single device, the user should:
The user can also modify network parameters of a number of devices simultaneously. To perform the Batch Modification of Network Parameters, the user should:
When the user lost/forgot a password, Hikvision offers two methods of the restoration of the default password, depending on the firmware version (for firmware versions above V3.3.0 in DVRs and V5.3.0 in cameras, only the second method can be used).
The user should select the device for the action in the main SADP window. If the window looks like in the picture below, the user has to make the following steps:
Select the device > copy date and time from the "Start Time" window of SADP utility and the serial number of the device from the "Device Serial NO:" field > the data should be sent to Hikvision Technical Department > wait until the unlocking code (file) is sent back (within 1-2 working days) > select again the device to be unlocked > paste the code into the "Security Code" field and confirm with OK button > the password will be reset to the factory default form (user name: admin, password: 12345)
In the case of the second method, the user should also select the device for the action in the main SADP window. If the window looks like in the picture below, the user has to take the following steps:
Select the device > in the field by the "Export" button, enter a location for saving the exported data (DeviceKey.xml file) > press the "Export" button > send the data to Hikvision Technical Department > wait until the unlocking code (file) is sent back (within 1-2 working days) > select again the device to be unlocked > in the field by the "Import" button enter the location of the unlocking file and press the button > the password will be reset to the factory default form
The password for the administrator account will be reset to factory settings (using the first method, the default password is: 12345 ). In the second case, there is no password at all. So, during the first logging, the user should change or set the password to prevent access of unauthorized persons to the device. We strongly encourage customers to use strong passwords to increase security. A strong password must be composed of 8 to 16 characters, with at least three types of the following: lowercase letter, uppercase letter, digit, special character.
In the case of lost/forgotten administrator password, the user should use the "Reset password" option and:
Select the device > enter and confirm a new password (we strongly encourage customers to use strong passwords) > in the field by the "Export" button, enter a location for saving the exported data (DeviceKey.xml file) > press the "Export" button > Send the data to Hikvision Technical Department > Wait until the unlocking code (file) is sent back (within 1-2 working days) > Select again the device to be unlocked > in the field by the "Import" button enter the location of the unlocking file and press the button > the password will be changed to the entered one.